A flood sensor can save your life and property by monitoring the water level. It is easier to set up the Fibaro Flood Sensor and pair it with the Ezlo Atom.
The following pairing process applies equally to our entire family line-up of controllers:
First, turn the cover counter-clockwise to open it. Take out the battery blocker, confirm that the batteries if placed correctly, and put back the cover. You can get instructions on the positioning and installation in the user manual.
In the Vera app, tap the menu icon and scroll to “Devices.” By tapping on it, you will find the “+” symbol. Tap on it and scroll to ‘sensors,” where you will look for the Fibaro Flood Sensor. Select “Fibaro Flood sensor” to start the pairing process. When ready, click “Next” to commence the pairing process.
Going back to the sensor, click the tamper button inside the casing three times in quick succession while holding the sensor near the controller. The controller will recognize the device and pairs it with your system.
Choose a name for your sensor in the Vera app and select a room before finalizing the process.
That done, congratulations. Now you can start monitoring the sensor from your Vera app. You can also trigger a scene.
