Pairing an Evolve Plug-in Appliance Module LPM-15 with Ezlo Hubs is a quick and easy process that you can crack in a few minutes.
Pairing
The pairing process applies to all Ezlo controllers.
First, select your preferred location for your Appliance Module and plug it into the socket.
If in doubt, you can still consult the user manual for positioning when installing.
Open the Vera app on your smartphone and tap the main menu icon.
Select “Devices” and tap on the “+” symbol.
Select “Dimmers & Lights” and look for the Appliance Module.
Click on the Appliance Module to activate pairing.
When ready, tap “Next,” and the pairing process will start.
Go back to the Module, and press twice on the action button while keeping it close to the controller.
The controller will connect and pair up with the Plug-in Appliance Module.
Plug-in
You are all set to go and can now plug any appliance into your Evolve Plug-in Appliance Module LPM-15 and control it with the app to switch on. You may also use the Module to switch on or off the lights appropriately.
Unpairing
If you wish, you can cancel the pairing of a device by selecting “unpairing” on the app and clicking the Module action button twice.
Wait for the app to register the action and confirm.
